Use and Care Manual

Troubleshooting (cont.)
Symptoms Probable Causes Recommended Action
B. The filter screen is
clogged.
B. Clean or replace the
filter screen. See the
“Clean the Filter
Screen” section.
C. The seat water
pressure is set at
Low.
C. Adjust the seat water
pressure to Medium
or High.
2. The seat
features do not
function.
A. The seat power
cord is
disconnected from
the electrical outlet,
or the fuse or
circuit breaker has
tripped.
A. Plug in the seat
power cord, or
replace/reset the fuse
or circuit breaker.
B. The seat sensor
does not detect
skin contact with a
user.
B. Make sure that the
seat user is making
skin contact with the
seat sensor.
3. Water, seat, or
dryer
temperature is
too low.
A. The water, seat, or
dryer temperature
is set at Low.
A. Adjust the water,
seat, or dryer
temperature to
Medium or High.
B. The user shifted
position and is no
longer detected by
the seat sensor.
B. Shift your position
on the seat. The
sensor is located on
the front of the seat.
Product Compliance
This device complies with Part 15 of the FCC Rules and Industry
Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
1321456-5-A 10 Kohler Co.