Use and Care Manual

Remove the Seat
IMPORTANT! When removing the seat for cleaning, use care to
avoid exerting any force on the hose connections.
Press the release button.
Slide the seat forward to access the area around the mounting
plate. Avoid putting pressure on the hoses.
Clean the area as needed.
To reinstall, slide the seat back until it engages the mounting
plate.
Troubleshooting
This troubleshooting guide is for general aid only. A Kohler Co.
Authorized Service Representative or qualified electrician should
correct any electrical problems.
For warranty service, contact the Customer Care Center using the
numbers located on the back page of this manual.
Symptoms Probable Causes Recommended Action
1. Low or no
water flow.
A. The water supply
to the seat is not
turned on.
A. Turn on the water
supply to the seat.
Mounting Plate
Release Button
Kohler Co. 9 1321456-5-A