Instructions / Assembly

6 TT-1297 9/11
5.4 Use the clamp removed in step 3.2 to attach the
breather tube to the nipple on the engine
crankcase. See Figure 11.
6. Reinstall the air cleaner.
6.1 Plug the breather access hole in the air cleaner
base plate with plug X-301-23. Insert the plug
from the bottom of the base plate. See Figure 12.
6.2 Place the air cleaner base on the heater and align
the holes.
6.3 Place the air cleaner bracket on the air cleaner
base. Attach the air cleaner base, bracket, and
heater to the carburetor using the four screws,
X-97-22. See Figure 13.
6.4 Reinstall the air cleaner element and covers. See
Figure 2.
6.5 Attach decal GM22387 as shown in Figure 1.
1
RMY
1. Clamp (reuse)
Figure 11 Breather Hose Clamp
(Model 8.5/11RMY shown)
1. Air cleaner base
2. Install plug X-301-23 through this hole from the bottom of the
air cleaner base.
2
RES
1
Figure 12 Air Cleaner Base with Plug
1. Air cleaner base
2. Screws, X-97-22, qty. 4
3. Air cleaner bracket
3
RMY
2
1
Figure 13 Air Cleaner Bracket and Screws