Replacement Part List

GM19462-KP4-QS GM57969-KP5-QS
Note: 120 volt kits shown.
Residential/Light Commercial Generator Accessories
Description
Carburetor heater kits are recommended for improved cold starting in locations where the temperatures falls below 0_C
(32
_F). Carburetor heaters prevent condensation and carburetor icing. The heater turns on when the temperature at the
thermostat falls below approximately 4
_C(40_F) and turns off when the temperature rises above approximately 16_C
(60
_F).
The carburetor heater for models 6VSG, 8.5RES, 12RES/RESL, and 14RESA/RESAL mounts between the engine air
cleaner and the carburetor. The carburetor heater for models 8/10/12RESV/RESVL uses an adaptor (included) to mount
on the carburetor. The carburetor heater for models 20RESA/RESAL, 20RESB, 20RESC/RESCL, and 20RESD fits into
a threaded opening on the carburetor.
Carburetor heater kits are available in 120 volt or 240 volt versions.
Note: The heater requires a continuous source of AC power that is backed up by the generator set.
Carburetor Heater Kits
Applicable Models
D 6VSG
D 8/10/12RESV/RESVL
D 8.5RES
D 12RES/RESL
D 14RESA/RESAL
D 20RESA/RESAL
D 20RESB
D 20RESC/RESCL
D 20RESD
G6-129 (Carburetor Heater Kits) 3/16d