Replacement Part List

G6-137 (OnCue Plus Wireless) 10/17c
View System Operation Data
Generator Set
D Home is powered by the generator or utility power
D Generator set status: running, standby, shutdown, or off
D Active fault indication
D Generator voltage
D Engine starting battery voltage, VDC
D Frequency, Hz
D Generator event history
D Event details, including description, time, and date
D Exercise type
D Next scheduled exercise date and time (estimated based on
last exercise date and time)
D Over 20 different parameters
D Generator power, in kW*
D Engine hours
D Last exercise date and time
D Exercise interval, duration and mode
Load Management
D View connected loads
D On/Off indicators for each circuit indicate status (powered or
shed)
D Change load labels to identify the connected circuits
D Loads are connected or s hed automatically based on
generator load
Programmable Interface Module (PIM)
D View relay status
D On/Off indicators show connected circuits
D Change input and output labels to identify connected circuits
6VSG Communications Kit
D View input and output status
D On/Off indicators show connected circuits
Notifications
Events
Email, text messages, and push notifications are sent for the
following events. Notifications for selected events can be turned
off or on for different recipients. Push notifications can be turned
on or off using a smart phone or tablet, and then viewed on a
smart phone, tablet, or personal computer.
D Exercise Start
D Exercise Ended
D Generator Running
D Generator Stopped
D Generator Not in Auto/In Auto
D Utility Loss/ Restored
D Communication Loss/Restored
D Warnings Active/Cleared (includes maintenance reminders)
D Shutdowns Active/Reset
Remote Control/Home Automation
Generator Set
D Start/stop exercises remotely
D Clear or reset faults remotely
D Manage exercise interval, duration and mode
Programmable Interface Module (PIM)
D Allows remote control of appliances and other electrical
devices in your home
D Use your PC or mobile device to turn your lights or
appliances on and off from any location with Internet access
D The generator does not need to be running in order to use
OnCue Plus for remote control of circuits connected to the
PIM.
System Requirements
D Personal computer (PC) requires an Internet browser with
Adober Flashr player 12 or higher
D A laptop computer and network cable (required for initial
setup of the wireless access point)
D Mobile devices require Android t Gingerbread 2.3 or higher
or iOS 4.3 or higher
D Customer-supplied router for Internet connection
D Always-on Internet access for the generator (for example,
cable, DSL, or phone line modem connected 24 hours a day)
D Uninterruptible power supply (UPS) for modem and router
(optional)
Wireless Access Point Specifications
D Environmental specifications:
d Operating temperature: --20 to 70_C (--4 to158_F)
d Storage temperature: --30 to 80_C (--22 to 176_F)
d Humidity: 10% to 95% non-condensing
d RoHS compliant
D Physical Specifications
d Dimensions. L x W x H: 228 x 64 x 61 mm
(9 x 2.5 x 2.4 in.)
d Weight: less than 400 grams (14 ounces)
d Enclosure: IP55 rated plastic
D RF Frequency:
d USA (FCC): 2.412--2.462 GHz (Channels 1 --11)
d Europe (ETSI): 2.412--2.472 GHz (Channels 1--13)
d IEEE 802.11gn HT40 ISM Band:
d USA: 2.422 --2.452 GHz (Channels 3--9)
d Europe: 2.422 --2.462 GHZ (Channels 3--11)
D Regulatory Compliance: FCC Part 15, CE EN300 328,
EN301 489--1/17, EC60950
D Standards Compliance: TEEE 802.11b/g/n, WiFi Certificate
D Electrical Specifications:
d Power requirements: 12 VDC @ 1A (switching)
d PoE: Passive 12V PoE
d Power consumption: ≤900 mA@ 12 VDC
D LEDs for power and network connection status
* Total power and percent of rated power can be displayed for these generator set models: 10RESV, 12RESV, 38RCL, two 14RESAs paralleled using the
Kohlerr PowerSynct Automatic Paralleling Module (APM), or two 20RESAs or 20RESBs paralleled using the APM.
Adobe Flash is a registered trademark of Adobe Systems Incorporated in the United States and/or other countries.