Installation Guide

4. Install the Supplies

CAUTION: Risk of restricted waterﬂow and product damage.

Use extreme care when bending the supply hoses to avoid

kinking and twisting. Hoses must not be taut after installation.

NOTE: If the sink installation requires that you coil the supply hoses

to obtain a good connection, maintain an inside coil diameter of at

least 3″ (7.6 cm).

Carefully position the hot and cold water supplies so they will

not interfere with other hoses.

Connect the supply hoses to the supply stops. Left is hot, right is

cold.

Tighten all connections.

3" (7.6 cm)

or Larger

Cold

Hot

1059390-2-A 6 Kohler Co.