Specifications

3-11/16"
Notes
Technical Information
Install this product according to the installation
instructions.
All product dimensions are nominal.
Battery - DC, includedPower source:
A 1-1/4" (32 mm) minimum to 1-1/2" (38 mm)
maximum diameter mounting hole is required.
Faucet:
0.5 gal/min (1.9 l/min)Flow rate:
The minimum distance between the back of the
faucet spout and the wall must be 1-3/4" (44 mm).
60 psi (4.1 bar)Pressure:
This will allow proper clearance for setscrew
access.
Cast brassValve body:
YesDrain included:
The maximum distance between the bathroom
sink basin edge to the base of the faucet spout
must be 1-3/4" (44 mm).
Spout:
5-5/16" (135 mm)Spout reach:
ADA, OBC, CSA B651 compliant when installed
to the specific requirements of these regulations.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
1-31-2019 09:30 - US/CA/MX
Kumin
®
faucet with Kinesis
™
sensor and mixer, DC-powered
K-104K37-SANA