Specification

Required Accessory
K-304-K Rite-Temp valve without stops ❑ NA
K-304-KS Rite-Temp valve with stops ❑ NA
K-306-KS HiFlow Rite-Temp valve with integral stops ❑ NA
K-308-K Non-pressure-balancing valve without stops ❑ NA
K-308-KS Non-pressure-balancing valve with stops ❑ NA
Optional Accessory
88526 HiFlow Rite-Temp thin wall installation kit ❑ CP ❑ Other ____
Installation Notes
CAUTION: Risk of damage to the K-306-KS valve
assembly. When using the K-306-KS valve in a
fiberglass or acrylic installation, use the thin wall
installation kit (88526).
Install this product according to the installation guide.
Avoid cross-flow conditions. Do not install shut-off device on
either valve outlet.
Install straight pipe or tube drop of 7″ (17.8 cm) to 18″ (45.7
cm) with single elbow between valve and wall-mount spout.
Top of Bath
4" (10.2 cm)
5-3/4" (14.6 cm)
1/2"-14 NPT
72" (182.9 cm)-
78" (198.1 cm)
to Floor (Typical)
For slip-fit spout, 1/2" nom.
tubing must extend 2-1/8"
(5.4 cm) min.; 3-1/2" (8.9 cm)
max. beyond finished wall.
For 1/2" IPS spout, pipe must
extend 4-1/2" (11.4 cm)
beyond finished wall.
48" (121.9 cm)
to Floor
(Shower Only)
10" (25.4 cm)
to Spout
(Bath Only)
3-3/16"
(8.1 cm)
6-3/8" D.
(16.2 cm)
3-3/16"
(8.1 cm)
4-9/16"
(11.6 cm)
6-7/8"
(17.5 cm)
Ceramic
Metal
Product Diagram
BANCROFTTM
BANCROFTTM BATH AND SHOWER FAUCET TRIM
Page2of2
1036173-4-
A