Dimensions Guide

36" (914 mm)
Notes
Required Electrical Service
Measure your actual product for rough-in details.
Three dedicated circuits required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
120 V, 15 A, 60 HzPump:
120 V, 15 A, 60 HzBlower:
120 V, 15 A, 60 HzHeater:
Remote blower installation kit is available for
relocating the blower. Provide access for servicing
the blower.
Technical Information
All product dimensions are nominal.
3-Wall AlcoveInstallation:
Do not relocate or alter the PVC tee or coiled
flexible tubing connected to the blower. Follow
the blower relocation instructions exactly.
LeftDrain location:
51-3/8" x 21" (1305 mm x 533 mm)Basin area, bottom:
ADA compliant when installed to the specific
requirements of these regulations.
64-1/2" x 30-1/2" (1638 mm x 775 mm)Basin area, top:
150 lbs (68 kg)Weight:
44.2 lbs/ft² (215.8 kg/m²)Minimum floor load:
15" (381 mm)Water depth:
72 gal (272.5 L)Water capacity:
Pump: 120 V, 7 A, 60 Hz
Blower: 120 V, 10 A, 60 Hz
Heater: 120 V, 12.5 A, 60 Hz
Electrical component
rating:
1-9/16" (40 mm)Minimum flat for door:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
9-28-2018 08:22
Archer
®
6' BubbleMassage
™
Whirlpool Bath
K-1124-XHGLA