Specification

K-1491 (cont.) Pillow ❑ 0 ❑ Other_____
K-1601 Footstop ❑ 0 ❑ Other_____
K-1703 Remote control NA
Technical Information
Fixture*:
Bathing well:
Basin area, bottom 42-3/8″ (1076 mm) x 20″ (508 mm)
Basin area, top 54-3/8″ (1381 mm) x 24-5/16″
(618 mm)
Weight 102 lbs (46.3 kg)
To overflow:
Water depth 15-1/16″ (383m)
Capacity 59.8 gal (226 L)
* Approximate measurements for comparison only.
VHzA
Blower motor/Heated surface 220-240 50/60 5
Drop-in cutout 59-1/2″ (1511 mm) x 28-1/2″ (724 mm)
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Blower motor/Heated
surface
220-240 V, 15 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide.
Will comply with ADA when installed per Section 607
Bathtubs of the ADA 2010 Standards for Accessible Design.
Floor support under bath must provide for a minimum of 50
lbs/square foot (242 kg/square meter) loading.
60" (1524 mm)
19"
(483 mm)
30"
(762 mm)
2-1/2"
(64 mm)
15"
(381 mm)
12-5/8"
(321 mm)
13/16"
(21 mm)
4-1/8"
(105 mm)
No change in measurement if connected with
drain illustrated. (K-7272)
Blower Motor/Control Access
30" (762 mm) W x
15" (381 mm) H Min
1-1/2" Bath Drain
Lumbar
Angle 40˚
1"
(25 mm)
Product Diagram
UNDERSCORE
®
UNDERSCORE
®
5’ BUBBLEMASSAGETM BATH WITH BASKTM
Page2of2
1201706-4-
B