Instructions / Assembly

3. Connect the Supplies
CAUTION: Risk of restricted water flow and product
damage. Use extreme care when bending the supplies to
avoid kinking.
CAUTION: Risk of product damage. Do not overtighten the
connections.
If the lavatory is not installed, install it at this time. Follow the
lavatory manufacturer’s instructions.
For Mexico only installations: Install the adapter.
Connect the supply tubes to the faucet supplies and supply stops.
(Left is hot - right is cold.)
Tighten the connections with an adjustable wrench.
Supply Stop
Supply Inlet
Adapter
(Mexico only)
Kohler Co. 5 1011034-2-F