Specification Sheet

18-3/4"
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
120 V, 15 A, 60 HzBlower:
Technical Information
All product dimensions are nominal.
Provide one grounded electrical outlet within 24"
(610 mm) of each component.
3-Wall AlcoveInstallation:
RightDrain location:
Remote blower installation kit K-1446 is available
for relocating the blower. Provide access for
servicing the blower.
48" x 24" (1219 mm x 610 mm)Basin area, bottom:
59" x 30" (1499 mm x 762 mm)Basin area, top:
109 lbs (49.4 kg)Weight:
Do not relocate or alter the PVC tee or coiled
flexible tubing connected to the blower. Follow
the blower relocation instructions exactly.
42 lbs/ft² (205.1 kg/m²)Minimum floor load:
14" (356 mm)Water depth:
67 gal (253.6 L)Water capacity:
Blower: 120 V, 10 A, 60 Hz, 300 WElectrical component
rating:
1-15/16" (49 mm)Minimum flat for door:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
3-7-2017 05:17
Mariposa
®
5.5' BubbleMassage
™
Bath
K-1224-GRA