Sink Specification Sheet

14-3/8"
Notes
Technical Information
Install this product according to the installation
guide.
All product dimensions are nominal.
Under-mountInstallation:
The product diagram is based on the K-8998
adjustable P-trap with 1" (25 mm) of tailpiece
exposed.
Length: 18-3/8" (467 mm)
Width: 11-5/8" (295 mm)
Water depth: 4-5/8" (117 mm)
Bowl area
NOTICE: Countertop manufacturer or cutter must
use the current product template available at
1-3/4" (44 mm)Drain hole:
1053195-7, required, not includedTemplate:
www.kohler.com, or by calling 1-800-4KOHLER.
Kohler Co. is not responsible for cutout errors
when the incorrect cutout template is used.
ADA, CSA B651 compliant when installed to the
specific requirements of these regulations.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
7-4-2015 06:48
Ladena
®
Bathroom Sink
K-2214