Installation Guide

Tools and Materials
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don’t
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.
Before You Begin
Observe all local plumbing and building codes.
Shut off the main water supply.
Kohler Co. reserves the right to make revisions in the design of
products without notice, as specified in the Price Book.
1. Prepare the Site
IMPORTANT! Secure the piping to the framing.
Install or relocate the water supplies as necessary.
A typical bath and shower installation is plumbed using 1/2″
copper tubing and adapters.
Use thread sealant on all threaded connections.
Temporarily install 1/2″ nipples to the bath and shower elbows,
extending at least 2″ (5.1 cm) beyond the finished wall.
Turn on the water supply and check for leaks.
Complete the finished wall.
Plumbers
Putty
Thread
Sealant
Adjustable
Wrenches
Strap
Wrench
1011610-2-B 2 Kohler Co.