Dimensions Guide

20-1/4"
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One circuit required, protected with Class A Ground-Fault
Circuit-Interrupter (GFCI) or Residual Current Device (RCD).
Install this product according to the installation
instructions.
120 V, 15 A, 50/60 HzAmplifier:
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
Technical Information
All product dimensions are nominal.
Three-wall alcoveInstallation:
Control amplifier fits 16" (406 mm) center studs.
25' (7.6 m) cables are included.
RightDrain location:
50-3/8" x 19-5/8" (1280 mm x 498 mm)Basin area, bottom:
ADA compliant when installed to the specific
requirements of these regulations.
57-5/16" x 24-1/16" (1456 mm x 611 mm)Basin area, top:
83 lbs (37.6 kg)Weight:
45 lbs/ft² (219.7 kg/m²)Minimum floor load:
15-5/16" (389 mm)Water depth:
66 gal (249.8 L)Water capacity:
Amplifier: 120 V, 1.1 A, 50/60 HzElectrical component
rating:
2 at 15 W per channel
2 at 30 W per channel
Amplifier channels:
2-3/16" (55 mm)Minimum flat for door:
33 ft (0.8 m)Bluetooth® range:
3.0Bluetooth® version:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
1-31-2019 11:56 - US/CA
Archer
®
5.5' VibrAcoustic
®
Bath
K-1949-VBRA