Installation Guide

1. Preparation
Install the water supplies and drain piping according to the
roughing-in information.
Install sufficient backing behind the finished wall to provide a
secure material for the anchoring devices.
Hanger (provided) Installation
Install the hanger according to the roughing-in information. Use
1/4″ lag bolts and washers (neither is provided) or other suitable
fasteners to secure the hanger to the finished wall and backing
material. Make sure the hanger is level.
Concealed Arm Carrier Installation
Install the concealed arm carrier according to the roughing-in
information. Follow the installation information included with the
carrier. Make sure the carrier is level.
Kohler Co. 3 1018370-2-B