Installation Guide

1010427-2-A
4
Kohler Co., Kohler, WI U.S.A.
 Set the lavatory on the pedestal so
the hanger bolts extend through
the lavatory holes.
 Level the lavatory.
 Install the cap nuts and washers,
and tighten until snug.
CAUTION: Risk of product
damage
. Do not overtighten the cap
nuts. Overtightening may cause
damage to the product.
 Connect and tighten the trap.
Connect the hot and cold water
supplies to the faucet.
Finish Wall
Hanger
Bolts
Cap Nut
Washer
Lavatory
Pedestal
IMPORTANT CONSUMER INFORMATION
CARE AND CLEANING
Clean the outside surface of your vitreous china product with mild soap and warm water.
Wipe the entire surface completely dry with a clean, soft cloth.
If the surface of your vitreous china product becomes excessively dirty, you can use a
general purpose cleaner such as: Fantastik, Lysol Foaming Disinfectant, Dow
Bathroom Cleaner Liquid, Scrub Free Soap Scum Remover, Soft Scrub, Spic and
Span, or Mr. Clean.
CALL US FOR HELP
Here’s what you need to do if you require service:
First review the installation instructions to ensure correct installation. For additional
assistance in the USA, call our Customer Service Department for direct help. You may
also contact us at our web site listed below.
Call 1-800-4-KOHLER within the U.S.
Call 001-877-680-1310 within Mexico
Call 1-800-964-5590 within Canada
