Installation Guide



1007275-2-A
2001 Kohler Co.
Español, Página 5
Français, Page 9
MEMOIRS

PEDESTAL LAVATORY
K-2258, K-2259

BEFORE YOU BEGIN
NOTES
 Observe all local plumbing and
building codes.
 Prior to installation, unpack the new
lavatory and inspect it for damage.
Return the lavatory to its protective
carton until you are ready to install it.
 These instructions are for installing
the lavatory to wood frame
construction. For other installations,
supply suitable bracing and
fastening devices of sufficient size
and strength.
 The walls and floor must be square,
plumb, and level.
ROUGHING-IN
(S) 10” (25.4cm) (Based on 12” (30.5cm)
risers which may require cutting).
(T) Pop-up drain typically 14-1/2”
(36.8cm); grid drain typically 13-5/8”
(34.6cm).
Fixture dimensions are nominal and
conform to tolerances in ASME Standard
A112.19.9M.
8-1/4” (21cm)
MOUNTING
HOLE
2-3/8”
(6cm)
8”
(20.3cm)
4” (10.2cm)
22” (55.9cm)
FINISHED WALL
27” (68.6cm)
(S)
(T)
22-1/8” (56.2cm)
35”
(88.9cm)
3/8” HOT
3/8” COLD
1/2” (1,3cm) D.
MOUNTING HOLE
IN PEDESTAL
1/2” (1.3cm) D.
ANCHOR HOLES IN
LAVATORY
1-1/4” OUTLET
3-1/4” (8.3cm)
8-7/8”
(22.5cm)
2-3/4”
(7cm)
K-2258-1
4” (10.2cm)
2-3/8”
(6cm)
K-2258-4
4” (10.2cm)
2-3/8”
(6cm)
K-2258-8
4” (10.2cm)