Specification
Technical Information
Fixture:*
Basin area 18-1/16″ (45.9 cm) x 10-3/16″
(25.9 cm)
Water depth 7-1/2″ (19.1 cm)
Drain hole 1-5/8″ (4.1 cm) D.
* Approximate measurements for comparison only.
Holes K-2839-8 K-2839-4 K-2839-1
Spout 1-3/8″ D.
(3.5 cm)
1-1/4″ D.
(3.2 cm)
1-3/8″ D.
(3.5 cm)
Faucet 1-3/8″ D.
(3.5 cm)
1-1/4″ D.
(3.2 cm)
Included components:
Cut-out template 1147017-7
Installation Notes
Install this product according to the installation guide.
Will comply with ADA when installed per section 606
Lavatories of the Act.
Spout must be 5″ (12.7 cm) long (min) for adequate clearance
into the lavatory when installed with the centerline as shown.
Spout must be tall enough to clear 3″ (7.6 cm) rim height and
provide a 1″ (2.5 cm) air gap per ASME A112.1.1.
NOTICE: Countertop manufacturer or cutter must use the
cut-out template provided with product, or a current one
provided by Kohler Co. (call 1-800-4-KOHLER). Kohler Co. is
not responsible for the cut-out errors when the incorrect
cut-out template is used.
8"
(20.3 cm)
Min
3-5/16"
(8.4 cm)
9"
(22.9 cm)
Min
11"
(27.9 cm)
27"
(68.6 cm)
Min
34"
(86.4 cm)
24" (61 cm)
Recommended ADA Installation
8-1/2"
(21.6 cm)
3-11/16"
(9.4 cm)
17"
(43.2 cm)
20" (50.8 cm)
10" (25.4 cm)
9-5/16"
(23.7 cm)
2" (5.1 cm)
4" (10.2 cm)
3-11/16"
(9.4 cm)
3-11/16"
(9.4 cm)
4" (10.2 cm)
15-9/16"
(39.5 cm)
14"
(35.6 cm)
3/8" Hot
3/8" Cold
1-1/4" OD
K-2839-1
K-2839-4
K-2839-8
1-1/8"
(2.9 cm)
Product Diagram
TIDESTM
TIDESTM SELF-RIMMING LAVATORY
Page2of2
1154760-4-
B