Specification

Technical Information
Fixture:*
Basin area 14″ (356 mm) x 12″ (305 mm)
Water depth 5″ (127 mm)
Drain hole Ø 1-11/16″ (43 mm)
* Approximate measurements for comparison only.
Holes K-2917-8 K-2917-4 K-2917-1
Spout Ø 1-3/8″
(35 mm)
Ø 1-3/8″
(35 mm)
Ø 1-3/8″
(35 mm)
Faucet Ø 1-3/8″
(35 mm)
Ø 1-3/8″
(35 mm)
Included components:
Overflow ferrule 84896
Cut-out template 101082-7
Installation Notes
Install this product according to the installation guide.
NOTICE: Countertop manufacturer or cutter must use the
cutout template provided with the product, or a current one
provided by Kohler Co. (call 1-800-4-KOHLER). Kohler Co. is
not responsible for cutout errors when the incorrect cutout
template is used.
Will comply with ADA when installed per Section 606
Lavatories of the Act.
Will comply with CSA B651 when installed per Clause 4.3.3
of the standard.
Will comply with OBC when installed per Clause 3.8.3.11.
6"
(152 mm)
Max
3/4"
(20 mm)
2-3/4"
(70 mm)
2-3/4"
(70 mm)
2-3/4"
(70 mm)
6-7/8"
(175 mm)
6-1/8"
(156 mm)
8-5/8"
(219 mm)
31"
(787 mm)
Recommended ADA Installation
14" (356 mm)10" (254 mm)(S)
(T) Pop-up drain 14-3/16" (360 mm),
grid drain 13-5/16" (338 mm).
Supply (Based on 12" riser
which may require cutting).
K-2917-4
K-2917-1
K-2917-8
1-1/4"
Outlet
4" (102 mm)
4" (102 mm)
1/2" (13 mm)
Ø 19" (483 mm)
(T)
(S)
3/8" Hot
3/8" Cold
4" (102 mm)
9"
(229 mm)
Min
8"
(203 mm)
Min
27"
(686 mm)
Min
34"
(864 mm)
2-1/2"
(64 mm)
24" (610 mm)
K-2917-8
K-2917-4
Standard Installation
K-2917-1
Product Diagram
RADIANT
®
RADIANT
®
COUNTERTOP BATHROOM SINK
Page2of2
105072-4-
DG