Specification Sheet

UNDERTONEt

UNDERCOUNTER SINK

FEATURES

• 22” (55.9cm) x 8--1/4” (21cm)

• 16 gauge stainless steel

• Undercounter

• Single compartment

• Includes installation hardware

• Includes wire basket and rack

CODES/STANDARDS APPLICABLE

Specified model meets or exceeds the following:

• IAPMO/UPC

• CSA B45

• ASME A112.19.3

K -3154

COLORS/FINISHES

• NA None Applicable

Accessories:

• CP Polished Chrome

• ST Electro-polished Stainless Steel

• Other Refer to Price Book for additional colors

SPECIFIED MODEL:

Model Description Color s /Finis he s

K-3179 Undercounter sink

VNA

Included Accessories

K-3127 Wire basket

VST

K-3136 Wire rack

VST

Optional Accessories

K-8801 Duostrainer sink strainer

VCP VOther_____

PRODUCT SPECIFICATION:

The undercounter sink shall be 22” (55.9cm) in length, and 8-1/4” (21cm) in width. Sink shall be made of 16 gauge stainless

steel. Sink shall be single compartment. Sink shall include installation hardware. Sink shall include wire basket and rack.

Sink shall be Kohler Model K-3154-_______.

Page1of2

1022026-4-

We reserve the right to make revisions without notice in the design of fixtures or in

packaging unless this right has specifically been waived at the time the order is accepted.

PAGE 1
UNDERTONEt UNDERCOUNTER SINK FEATURES • • • • • • K-3154 22” (55.9cm) x 8--1/4” (21cm) 16 gauge stainless steel Undercounter Single compartment Includes installation hardware Includes wire basket and rack CODES/STANDARDS APPLICABLE Specified model meets or exceeds the following: • IAPMO/UPC • CSA B45 • ASME A112.19.
PAGE 2
UNDERTONEt PRODUCT INFORMATION Fixture*: basin area water depth Sink 20” (50.8cm) x 6-3/4” (17.1cm) 4-7/8” (12.4cm) Outlet 3-5/8” D. (9.2cm) * Approximate measurements for comparison only. Included Components: Hardware kit Cutout template 91915 1022026-7 COUNTERTOP 1” (2.5cm) 4-1/8” (10.5cm) 8-1/4” (21cm) SINK CLIP 11” (27.9cm) 2” (5cm) MIN.* 22” (55.9cm) 10-5/8” (27cm) 5-1/4” (13.