Rough In Guide

Product Information
Applicable product:
High Efficiency Urinal (HEU) K-5244-ET
Fixture:
Configuration 3/4″ top spud urinal
Water per flush 0.125 gpf (0.47 lpf)*
Spud inlet size 3/4″
* Designed to flush with 0.125 gpf (0.47 lpf) of water
when installed with a water-saving flushometer.
Included components:
3/4″ inlet spud 1212716
2″ outlet spud 18766
Hanger (2 required) 64512
Universal mounting bracket 1044200
Removable strainer 1195702
Recommended accessories:
WAVE DC flushometer – 0.125 gpf (0.47 lpf) K-10668
Touchless DC urinal flushometer with
TriPoint
TM technology – 0.125 gpf (0.47 lpf)
K-10949
Manual washdown urinal flushometer – 0.125
gpf (0.47 lpf)
K-13520
Installation Notes
Install this product according to the installation guide.
Roughing-in remains the same when using the optional 3″
outlet spud.
NOTICE: For ADA compliance, measurement must be from
the floor to the top of the internal lip.
Will comply with ADA when installed per Section 605 Urinals
of the 2010 ADA Standards for Accessible Design.
Fixture conforms to ASME Standard ASME A112.19.2/CSA
B45.1. All dimensions are nominal.
Floor
Wall
15-5/8" (397 mm)
15" (381 mm)
29-5/8"
(752 mm)
20"
(508 mm)
9-5/8"
(244 mm)
2" NPT
Tap
1/4"
(6 mm)
6"
(152 mm)
2" NPT
Tap
Spud Detail
16-1/8" (410 mm)
to Center of
Hanger Slots
6-3/4"
(171 mm)
Wall Hangers
24" (610 mm)
Standard Installation
17" (432 mm)
ADA Installation
8-1/8" (206 mm)
Standard Installation
1-1/8" (29 mm)
ADA Installation
Internal Lip
2-1/4"
(57 mm)
Roughing-In
K-5244-ET
STEWARD
®
HYBRID
HIGH EFFICIENCY URINAL (HEU)
STEWARD
®
HYBRID HIGH EFFICIENCY URINAL (HEU)
1212717-1-
B