Specification

Features

•

Metal construction

•

Wall-mount installation

•

Diverter or non-diverter models

•

5/8″ OD slip-ﬁt or 1/2″ NPT connection

Codes/Standards Applicable

Speciﬁed model meets or exceeds the following:

•

ASME A112.18.1/CSA B125.1

WALL-MOUNT BATH SPOUT

K-5327

ALSO K-5328

K-5327

K-5328

Colors/Finishes

•

CP: Polished Chrome

•

Other: Refer to Price Book for additional colors/ﬁnishes

Speciﬁed Model

Model Description Color/Finish

K-5327 Wall-mount bath spout - with diverter ❑ CP ❑ Other ____

K-5328 Wall-mount bath spout - less diverter ❑ CP ❑ Other ____

Product Speciﬁcation

The wall-mount bath spout shall be of metal construction. Spout shall be available with or less diverter. Spout shall feature 5/8″

OD slip-ﬁt or 1/2″ NPT connection. Wall-mount bath spout shall be K-_______-_____.

REFINIA

Page 1 of 2

1159564-4-

USA/Canada: 1-800-4KOHLER

(1-800-456-4537)

www.kohler.com

PAGE 1
REFINIA® Features • • • • WALL-MOUNT BATH SPOUT K-5327 Metal construction Wall-mount installation Diverter or non-diverter models 5/8″ OD slip-fit or 1/2″ NPT connection ALSO K-5328 Codes/Standards Applicable Specified model meets or exceeds the following: • ASME A112.18.1/CSA B125.
PAGE 2
REFINIA® Installation Notes Install this product according to the installation guide. Water supply tube must be centered with the hole. For slip-fit spout, 5/8" OD tube must extend 5-9/16" (141 mm) beyond finished wall. For threaded spout, 1/2" NPT pipe must extend 5-9/16" (141 mm) beyond finished wall. Water Supply Tube 6-3/4" (171 mm) K-5327 Water supply tube must be centered with the hole. For slip-fit spout, 5/8" OD tube must extend 5-9/16" (141 mm) beyond finished wall.