Installation Guide

2. Prepare the Bath
NOTICE: Do not lift the bath by the piping, pump, or blower, or use these components for structural
support of the bath. To avoid damage to the bath, lift at the sides of the bath.
IMPORTANT! Provide access to the drain connections after bath installation.
IMPORTANT! Do not rest the bath on the drain fitting while connected to the bath.
IMPORTANT! Drop-In Models: Do not fully install the drain assembly prior to installing the bath. The
bath cannot be installed with all drain components attached.
Drop-In Installation
Assemble the slotted overflow and drain fitting to the bath.
Cut the overflow pipe and drain waste pipe to proper lengths and dry fit the drain tee to verify fit.
Remove the drain tee to provide flexibility when installing the bath.
Protect the bath surface by positioning a clean drop cloth in the bottom.
Alcove Installation
Fully install the drain to the bath according to the instructions packed with the drain.
Protect the bath surface by positioning a clean drop cloth in the bottom.
Cut pipes to
proper length.
Overflow
Drain
Fitting
Tee
Remove the tee
to ease bath
installation.
Provide access to drain
connections after installation.
IMPORTANT!
For Drop-In
Installation:
1208018-2-D 6 Kohler Co.