Specification Sheet
Technical Information
Fixture*:
Bowl area 14″ (356 mm) x 16″ (406 mm)
Drain hole Ø 3-7/8″ (98 mm)
Water depth 7-1/2″ (191 mm)
* Approximate measurements for comparison only.
Included components:
Bowl clamp accessory pack 52047
Cut-out template 114332-7
Installation Notes
Install this product according to the installation guide.
Refer to install instructions included with fixture before
beginning installation.
Supplied bowl clamp assemblies require 1″ (25 mm) minimum
countertop thickness. Installer must supply hardware for
thinner countertops.
For multiple bowl under-mount installations, a minimum
distance of 3-3/8″ (86 mm) is required between bowls.
Countertop supplier to determine required support.
C
Top-Mount
Installation
Sink
Sealant
Ø 3/8"
(10 mm)
5/8"
(16 mm)
Sink
Sealant
Under-Mount
Installation
18-3/4"
(476 mm)
6-1/2"
(165 mm)
L Of Fitting
1-1/4"
(32 mm) Min
8-1/2"
(216 mm)
17" (432 mm)
13-1/2"
(343 mm)
1-1/2" OD
8-1/4"
(210 mm)
3/8" (10 mm)
1-1/2" (38 mm)
Product Diagram
IRON/TONES
®
IRON/TONES
®
TOP-MOUNT OR UNDER-MOUNT KITCHEN SINK
Page2of2
114332-4-
AE