Installation Guide

2. Install the Counter
CAUTION: Risk of property damage. Do not use adhesive
sealant to secure the counter material to the bath. Adhesive
sealant will permanently bond the counter material to the
bath making separation difficult and costly. Instead, use
silicone sealant or caulk which will ease future maintenance
or removal of the counter material.
Clean the bath rim.
NOTICE: The bead of silicone sealant must be placed a minimum of
2″ (5.1 cm) away from the inside well edge of the bath rim.
Apply a continuous bead of silicone sealant to all areas where the
bath rim and counter material meet.
Align and properly position the counter material over the bath.
Press the counter firmly onto the bath.
Temporarily set weights on the counter material. This will hold
the counter material in place while the silicone sealant dries.
Apply a continuous bead of silicone sealant where the bath rim
and the counter material meet.
Inside Well
Edge
Apply silicone
sealant.
Weights
Apply silicone
sealant or caulk.
Kohler Co. 5 114753-2-CC