Installation Guide

1. Preparation
Install the water supplies and drain piping according to the
roughing-in information.
NOTE: You may require different, more specialized tools to install
this sink to countertop materials other than wood or wood
composites.
Cut along the inside of the template line where indicated for the
countertop opening.
Position the template on the countertop. Check for adequate
clearance between the sink, faucet, backsplash and cabinet.
For multiple-bowl installations, additional support will be
required between bowls installed in countertops that are less than
1″ (2.5 cm) thick.
For multiple-bowl, undercounter installations, a minimum
distance of 3-3/8″ (8.6 cm) is required between cut-outs.
Trace around the template on the countertop with a pencil.
Centerlines are provided to help align the opening.
Mark the faucet hole centerline on the countertop.
Verify there is adequate clearance between the sink, faucet,
backsplash and cabinet.
For most undercounter installations: A minimum distance of
2-7/8” (7.3 cm) is required between the faucet centerline and the
edge of the template.
Cutting Line
TEMPLATE
Faucet Centerline
(Most Models)
Undercounter - 2-7/8" (7.3 cm)
Self-Rimming - 1-7/8" (4.8 cm)
Minimum
1019947-2-C 4 Kohler Co.