Installation Guide

2. Undercounter Installation
CAUTION: Risk of product damage. Do not cut, drill, or sand
the countertop while it is positioned over the fixture.
Cut out the opening by carefully following the pencil line traced
from the template.
Equally space the appropriate number of clamps, and mark the
clamp-mounting holes on the underside of the countertop.
For Wood Countertops
Pre-drill the wood screw holes at the marked locations.
Waterproof any exposed areas of wood.
For Marble/Stone Countertops
Position the countertop upside down on foam padding to protect
the surface. Drill 3/8″ holes 5/8″ (1.6cm) deep at the marked
locations to accomodate the anchors provided.
Use a setting tool and hammer to secure the anchors flush with
the countertop bottom surface.
Install the clamps.
Countertop Opening - Bottom View
Clamp
Screw
Anchor
Bottom View
Countertop
Sealant
Sink
Screw
Clamp
Edge
Countertop
Opening
2" (5.1 cm)
1019947-2-C 6 Kohler Co.