Specification

IRON/TONES
364
1-1/2” OUTLET
6-1/2”
(16.5cm)
8-1/4”
(21cm)
12-1/8”
(30.8cm)
24-1/4” (61.6cm)
(T)
3/8” (1cm)
C
L OF FITTING
1-1/4”
(3.2cm)
MIN.
18-3/4”
(47.6cm)
1-1/2”
(3.8cm)
1-1/2” R.
(3.8cm)
SEALANT
3/8” D. (1cm)
5/8”
(1.6cm)
SINK
SOLID SURFACE
INSTALLATION
SELF-RIMMING
INSTALLATION
SEALANT
SINK
PRODUCT INFORMATION
Fixture*: basin area water depth
Sink 21” (53.3cm) x
16” (40.65cm)
7-1/2”
(19.1cm)
Outlet 3-7/8” D.
(9.8cm)
* Approximate measurements for comparison only.
Included Components:
Basin clamp accessory pack 52047
Cutout template 114333-7
Roughing-In Notes
Fixture dimensions are nominal and conform to toler-
ances in ASME/ANSI Standard A112.19.1M.
(T) Drain typically 13-1/2” (34.3cm).
Supplied basin clamp assemblies require 1” (2.5cm)
minimum countertop thickness. Installer must supply
hardware for thinner countertops.
For multiple bowl undercounter installations, a minimum
distance of 3-3/8” (8.6cm) is required between bowls.
Countertop supplier to determine required support.
K-6585 Iron/Tones  Sink
Page 2 of 2
114333-4-AC
PRODUCT DIAGRAM