Installation Guide
1013610-2-A
5
Kohler Co.
Leg
Leveling Pin
Sealant
Safety
Bracket
Trace the bottom of the leg. Draw 2 lines
from corner to corner. The point where the
lines intersect is the location of the leveling
pin hole.
Centerpoint
Attach the safety bracket to the ridge on the side of
the sink. Then attach to the wall using the proper
screw or lag bolt. This bracket will help prevent the
sink from lifting out of the mounting brackets.
Back of sink
Apply sealant
to backside
4. Install the Sink and Legs