Installation Guide

Tools/Outils/Herramientas

Important Information

CAUTION: Risk of personal injury or product damage. Cast iron sinks are very

heavy. Get assistance lifting the sink.

IMPORTANT! Using a wood support frame is an installation option for all

undercounter cast iron sinks, but is required for non-rectangular sinks. Refer to the

″Install Using a Wood Support Frame″ section for this option.

Undercounter sinks should be installed by experienced installers.

To ensure a safe and damage-free installation, two people should install the sink.

Prior to installation, unpack the new sink and inspect it for damage. Return the

sink to its protective carton until you are ready to install it.

Plan the sink installation so future removal from underneath the countertop is

possible without damaging the countertop. Do not use adhesive sealants.

Use proper fasteners and techniques to ensure that the frame will support a

minimum of 300 lbs (136 kg). Locate the fasteners for easy access in the event the

sink needs to be removed.

A cabinet with a minimum width of 36″ (91.4 cm) is recommended for this

installation.

Inspect the drain and supply tubing; replace if necessary.

Observe all local plumbing and building codes.

All information in these instructions is based on the latest product information

available at the time of publication. Kohler Co. reserves the right to make

revisions in the design of products without notice, as speciﬁed in the Price Book.

Renseignements importants

ATTENTION: Risque de blessure corporelle ou d’endommagement du produit.

Les éviers en fonte sont très lourds. Demander de l’assistance pour soulever

l’évier.

IMPORTANT! Utiliser un cadre de support est une option d’installation pour tous les

éviers en fonte sous comptoir, mais est requis pour les éviers non-rectangulaires. Se

référer à la section ″Installer un cadre de support en bois″ pour cette option.

Les éviers sous comptoir devraient être installés par des installateurs experts.

Plus/Plus/Más:

• Support Framing Materials (Optional)

Matériels de cadrage de support (Optionnel)

Material para la estructura de soporte (Opcional)

• Sealant/Mastic/Sellador

• Rags/Chiffons/Trapos

Kohler Co. 3 1068591-2-C