Specification

Features

•

Metal construction

•

Wall-mount installation

•

Includes check valve for backﬂow prevention

•

1/2″ - 14 NPT connection

•

Pivots to position a handshower

•

For use with handshower and hose

•

Coordinates with Artifacts faucets and accessories

Codes/Standards Applicable

Speciﬁed model meets or exceeds the following:

•

ASME A112.18.1/CSA B125.1

HANDSHOWER HOLDER

K-72797

Colors/Finishes

•

CP: Polished Chrome

•

Other: Refer to Price Book for additional colors/ﬁnishes

Speciﬁed Model

Model Description Colors/Finishes

K-72797 Handshower holder ❑ CP ❑ Other_____

Product Speciﬁcation

The handshower holder shall be of metal construction. Product shall be wall-mount installation. Product shall include check

valve for backﬂow prevention. Product shall have 1/2″ - 14 NPT connection. Product shall pivot to position a handshower.

Product shall be for use with handshower and hose. Product shall coordinate with Artifacts faucets and accessories. Product

shall be Kohler Model K-72797-_______.

Page 1 of 2

1197851-4-

USA/Canada: 1-800-4KOHLER

(1-800-456-4537)

www.kohler.com

PAGE 1
Features • • • • • • • HANDSHOWER HOLDER K-72797 Metal construction Wall-mount installation Includes check valve for backflow prevention 1/2″ - 14 NPT connection Pivots to position a handshower For use with handshower and hose Coordinates with Artifacts faucets and accessories Codes/Standards Applicable Specified model meets or exceeds the following: • ASME A112.18.1/CSA B125.
PAGE 2
Installation Notes Install this product according to the installation guide. Product installs using a NPT connection to a 1/2″ - 14 NPT nipple. 4-1/4" (108 mm) 2-3/8" (60 mm) 2-13/16" (71 mm) Ø 2-3/8" (60 mm) 2-7/16" (62 mm) 1-1/2" (38 mm) G1/2-14 Threaded Hose Connection For NPT connection, nipple must extend 7/16" (11 mm) beyond finished wall.