Installation Guide

2. Supply Connections
Connect the Filter Assembly
Turn on the water and flush water through the supply stops into
a bucket.
Turn off the water.
Remove the filter assemblies from the supply hoses. Then thread
a filter assembly onto each supply stop.
Connect the Supplies
For models with two hoses, thread the left supply hose to the
filter assembly on the hot supply stop and the right supply hose
to the filter assembly on the cold supply stop.
For models with one hose, thread the supply hose to the filter
assembly on the supply stop.
Tighten the connections with a small adjustable wrench.
Turn on the water and flush the faucet by activating it.
NOTE: For optimum performance, clean your filter screens
periodically. Refer to the Maintenance Guide.
Flex Hose
Filter
Assembly
Supply
Stop
Housing
Adapter
Screen
Kohler Co. 5 1124217-2-E