Installation Guide

2. Disassemble the Strainer
Remove the strainer cup and stopper from the drain body.
Thread the screw out of the control body housing and remove the drain body.
3. Prepare the Drain Control
Look inside the control housing and position the actuator assembly with the outer flat toward the
front of the sink.
Control Flange
Gasket
Flange Nut
Strainer Cup
Stopper
Screw
Drain Body
Fiber Gasket
Cable
Control Knob
Indicator
Control Body
Housing
Control Body
Gasket
Control
Body
Rubber
Gasket
Plastic
Washer
Control
Housing
Control
Flange
Control
Housing
Inner
Flat
Outer Flat Toward
Front of Sink
113776-2-AB 4 Kohler Co.