Specification

Features

•

Metal construction

•

Wall-mount installation

•

Includes check valve for backﬂow prevention

•

1/2″ - 14 NPT connection

•

Pivots to position a handshower

Codes/Standards Applicable

Speciﬁed model meets or exceeds the following:

•

ASME A112.18.1/CSA B125.1

HANDSHOWER HOLDER

K-8987

Colors/Finishes

•

CP: Polished Chrome

•

Other: Refer to Price Book for additional colors/ﬁnishes

Speciﬁed Model

Model Description Colors/Finishes

K-8987 Handshower holder ❑ CP ❑ Other_____

Product Speciﬁcation

The handshower holder shall be of metal construction. Product shall be wall-mount installation. Product shall include check

valve for backﬂow prevention. Product shall have 1/2″ - 14 NPT connection. Product shall pivot to position a handshower.

Product shall be Kohler Model K-8987-_______.

TOOBITM

Page 1 of 2

1155529-4-

USA/Canada: 1-800-4KOHLER

(1-800-456-4537)

www.kohler.com

PAGE 1
TOOBITM Features • • • • • HANDSHOWER HOLDER K-8987 Metal construction Wall-mount installation Includes check valve for backflow prevention 1/2″ - 14 NPT connection Pivots to position a handshower Codes/Standards Applicable Specified model meets or exceeds the following: • ASME A112.18.1/CSA B125.
PAGE 2
TOOBITM Installation Notes Install this product according to the installation guide. Product installs using a NPT connection to a 1/2″ - 14 NPT nipple. 4-1/16" (10.3 cm) 2-9/16" (6.5 cm) 1-9/16" (4 cm) D. 1-9/16" (4 cm) D. 1-15/16" (4.9 cm) 1-5/16" (3.3 cm) G1/2-14 Threaded Hose Connection For NPT connection, nipple must extend 9/16" (1.4 cm) beyond finished wall. 3/16" (5 mm) Max Gap All Around 1-1/8" (2.9 cm) D. Max Hole in Wall 1/2" - 14 NPT nipple 3-7/16" (8.