Installation Guide

Install New Trip Lever
Remove the tank cover from the toilet.
Insert the trip arm of the trip lever into the toilet tank hole. If
installing a vertical style lever, ensure that the ″U″ on the end of
the plastic bushing is pointing up.
Install the spacer (if used) over the trip arm so the arrow on the
spacer is pointing upward and is visible.
Secure the trip lever assembly with the washer (if supplied) and
locknut. Remember that the locknut has left-hand threads.
Do not overtighten the locknut, or the trip lever will not move
freely. If the assembly binds, loosen the locknut slightly until free
movement is achieved.
Hook the flapper ball chain to the hole in the trip arm. Check for
proper chain length, and adjust as needed.
Check for smooth operation and flush actuation. Trip arm
movement should be free of interference. The trip lever should be
horizontal when at rest.
Replace the tank cover.
Vertical Style Lever
Flapper
Ball Chain
Toilet Tank
Trip Lever
Spacer
Locknut
Trip Arm
U ("up") Indicator
Kohler Co. 3 087773-2-AF