Specification

Required Rite-Temp Valve
K-304-K Less stops ❑ NA
K-304-KP CPVC connections –
with stops
❑ NA
K-304-KS With stops ❑ NA
K-305-K Push-button diverter
– less stops
❑ NA
K-305-KS Push-button diverter
– with stops
❑ NA
K-306-KS HiFlow – with stops ❑ NA
* Requires 88526-C/F for thin wall installations.
Installation Notes
Install this product according to the installation guide.
NOTICE: For K-306-KS valve: The thin wall installation kit
(88526-C/F) is required for thin wall (fiberglass or acrylic)
installations.
Avoid cross-flow conditions. Do not install shut-off device on
either valve outlet.
Cap shower outlet if deck-mount spout, diverter, or
handshower is connected to spout outlet.
Install straight pipe or tube drop of 7″ (17.8 cm) to 18″
(45.7 cm) with single elbow between the valve and wall-mount
spout.
Top of Bath
6-13/16" (17.3 cm)
3-3/16"
(8.1 cm)
7-3/16"
(18.3 cm)
10-5/16"
(26.2 cm)
3-9/16"
(9 cm)
2-1/8"
(5.4 cm)
6-1/2"
(16.5 cm)
6-1/2"
(16.5 cm)
4"
(10.2 cm)
10" (25.4 cm)
to Spout
(Bath Only)
72" (182.9 cm)
78" (198.1 cm)
to Floor (Typical)
48" (121.9 cm)
to Floor
(Shower Only)
5-1/2"
(14 cm)
For 1/2" NPT spout, pipe must
extend 7/16" (1.1 cm) beyond
finished wall.
1/2" NPT
Product Diagram
MARGAUX TM RITE-TEMP
®
MARGAUX TM RITE-TEMP
®
BATH AND SHOWER TRIM
Page2of2
1059598-4-
B