Installation Guide

4. Install the Handles

Apply a bead of plumbers putty or other sealant around the

bottom of each adapter according to the sealant manufacturer’s

instructions.

Thread an adapter onto each valve.

Install a stem extension onto each valve, then securely tighten

with a screw.

NOTE: For lever handle assemblies: The lever handle must point

away from the spout when in the closed position.

Position each handle assembly with the setscrew hole away from

the user (as shown), then slide each handle assembly over each

valve.

Tighten each handle assembly with a setscrew, then cover each

setscrew with a plug button.

Remove any excess plumbers putty or sealant.

Valve

Setscrew

Adapter

Screw

Cross Handle Assembly

Lever Handle Assembly

Stem Extension

Plug Button

1054538-2-C 6 Kohler Co.