How to Guide
Product Information
Applicable products:
Bath and shower trim, cross handle K-T461-3S
Bath and shower trim, faceted lever handle K-T461-4S
Bath and shower trim, deco lever handle K-T461-4V
Shower trim only, cross handle K-T462-3S
Shower trim only, faceted lever handle K-T462-4S
Shower trim only, deco lever handle K-T462-4V
Valve trim only, cross handle K-T463-3S
Valve trim only, faceted lever handle K-T463-4S
Valve trim only, deco lever handle K-T463-4V
Required accessories:
Rite-Temp
®
valve without stops OR K-304-K
HiFlow Rite-Temp valve with stops K-2971-KS
* For a complete listing of all the Rite-Temp valves, refer
to the K-304-* Specification Sheet or Roughing-In Sheet.
Optional accessories:
HiFlow Rite-Temp
®
thin wall installation kit 88526
Deep roughing-in kit for Rite-Temp
®
valve
(all handles)
1030932
Installation Notes
Install this product according to the installation guide.
Install the Rite-Temp
®
valve according to the valve installation
guide.
NOTICE: Risk of product damage. Long screws, for
installing trim, can damage the K-2971-KS valve. Consult the
trim installation guide to verify if the thin wall installation kit
(88526) is needed.
Avoid cross-flow conditions. Do not install shut-off device on
either valve outlet.
Cap shower outlet if deck-mounted spout, diverter, or
handshower is connected to the spout outlet.
Install straight pipe or tube drop of 7″ (17.8 cm) to 18″
(45.7 cm) with single elbow between valve and wall-mount
spout.
6" (15.2 cm)
72" (182.9 cm)-
78" (198.1 cm)
to Floor (Typical)
5-7/16"
(13.8 cm)
7-9/16"
(19.2 cm)
1/2" NPT
1/2"-14 NPT
Top of Rim
4" (10.2 cm)
10"
(25.4 cm)
2-3/4"
(7 cm)
3"
(7.6 cm)
Cross
Faceted Lever
Deco Lever
2-7/8"
(7.3 cm)
48" (121.9 cm)
to Floor
(Shower Only)
6" (15.2 cm)
Roughing-In
K-T461, K-T462, K-T463
MEMOIRS
®
STATELY
BATH AND SHOWER FAUCET TRIM
MEMOIRS
®
STATELY BATH AND SHOWER FAUCET TRIM
1104388-1-
B