Use and Care Manual

 Shut off the water supply at the main water source.

 Disconnect the water supply line from the water inlet valve.

 Disconnect the drain pipe to the drain line or floor drain.

 Allow the ice maker to run for an hour or more until all remaining ice cubes have been

ejected from the ice maker assembly.

 Shut off the electric supply at main electrical power source.

 Screw off the nut of the water drain hole at the back of the machine, drain out water residue

completely (do not loosen or screw off the nut at other times), then tighten the nut after

finishing.

 Drop the door open to allow for circulation and prevent mold and mildew.

 Leave water supply line and power cord disconnected until ready to reuse.

CLEANING AND MAINTENANCE

If the ice maker is left unused for a long time, before the next use it must

be thoroughly cleaned. Follow carefully any instructions provided for

cleaning or use of sanitizing solution.

Do not leave any solution inside the ice maker after cleaning.

Periodic cleaning and proper maintenance will ensure efficiency, top performance, and long life.

The maintenance intervals listed are based on normal conditions. You may want to shorten the

intervals if you have pets, or there are other special considerations.

What shouldn’t be done

Never keep anything in the ice storage bin that is not ice: objects like wine and beer bottles are

not only unsanitary, but the labels may slip off and plug up the drain.

What should be kept clean

There are 4 things to keep clean:

1. The exterior

2. The condenser

3. The interior

4. The ice making system