Use and Care Manual

23
for the desired ice size.
Smaller ice setting:
By pressing the “Clean” (-) button, you can decrease the size of the ice cubes. The “BIN FULL”
LED (red) will flash as you lower the ice size and will finally be blinking at the setting of smallest
ice size.
Larger ice setting:
By pressing the “Mode” (+) button, you can increase the size of the ice cubes. The “HARVEST”
LED (yellow) will flash as the larger size is set and will blink when the setting of largest ice size
has been reached.
After 10 seconds without any operation, the unit will automatically memorize the current state and
return to the previous mode.
NOTE:
 If during the ice size adjustment mode the “BIN FULL”, “ICE” and “HARVEST” LEDS blink all
at once, this indicates that the unit is in the regular (middle) setting of the ice size.
 When the machine is in the cleaning stage or ice full stage, the ice size adjustment mode cannot be
accessed.
Avoid letting water contact the control box.
MAJOR FUNCTIONS
1. Completely automatic operating procedure.
2. When the ice storage bin is full of ice cubes, the machine stops working automatically
and starts again after the cubes are removed.
3. The different colors of the LED display indicate various work modes.
4. Ice cube size is adjustable.
5. A sensitive probe and accurate timer enhance the performance of the ice maker.
6. Manual Clean mode to start or stop the ice making system cleaning.
7. Built-in compressor protection system.