Magicolor 1650en Laser Printer Manual
Table Of Contents
- magicolor 1650EN
- Contents
- Ch.1 Introduction
- Ch.2 Using the Printer Driver
- Ch.3 Using the Status Monitor (Windows Only)
- Ch.4 Printer Control Panel and Configuration Menu
- Ch.5 Media Handling
- Ch.6 Replacing Consumables
- Ch.7 Maintaining the Printer
- Ch.8 Troubleshooting
- Ch.9 Installing Accessories
- Appendix
Configuration Menu Overview4-20
ENABLE
AUTO IP
Settings
YES/NO
Select whether or not the IPv4
address is automatically acquired
when DHCP/BOOTP and PING,
ARP are not functioning or when
there is no response.
If
YES is selected, the IP address
is automatically acquired.
If NO is selected, the IP address
is not automatically acquired.
IPV6 ENABLE
Settings
YES/NO
If YES is selected, IPv6 is
enabled.
If NO is selected, IPv6 is disabled.
IDENTI-
FIER
Displays the Link-Local address.
ENABLE
AUTO
Settings
YES/NO
If YES is selected, auto
configuration of IPv6 is enabled.
If
NO is selected, auto
configuration of IPv6 is disabled.
GLOBAL
PREFIX
Displays the global address.
IP SER-
VICES
ENABLE
HTTP
Settings
YES/NO
If YES is selected, HTTP is enabled.
If NO is selected, HTTP is disabled.
DISABLE
FILTERS
Settings
YES/NO
If YES is selected, filter is disabled.
DISABLE
IPSEC
Settings
YES/NO
If YES is selected, IPsec is disabled.