Certifications 2

Safety Data Sheet
Regulation EC No 1907/2006 Art.31
Productname :
SOLDABSORB
Creationdate :
14.03.17 Version : 1.0
Ref.Nr.:
UDS000412_3_20170314 (EN)
Replaces:
UDS000412_20140519
CRC Industries Europe bvba
Touwslagerstraat 1, 9240 Zele – Belgium
Tel (+32) (0) 52 / 45 60 11 – Fax (+32) (0) 52 / 45 00 34 – www.crcind.com
5 / 8
STEL
2 mg/m3 (dust)
8.2. Exposure controls
Control procedures :
Ensure adequate ventilation
Personal protection :
Take precautions to avoid contact with skin and eyes when handling the
product.
Ensure adequate ventilation
inhalation :
In case of insufficient ventilation, wear suitable respiratory equipment.
hands and skin :
Wear suitable protective gloves
eyes :
Wear safety goggles according to EN 166.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Apperance : physical state :
Solid.
colour :
Copper.
odour :
Odorless.
pH :
Not applicable.
Boiling point/range :
Not applicable.
Flash point :
Not applicable.
Evaporation rate :
Not applicable.
Explosion limits : upper limit :
Not applicable.
lower limit :
Not applicable.
Vapour pressure :
Not applicable.
Relative density :
Not applicable.
Auto-ignition :
Not applicable.
Viscosity :
Not applicable.
9.2. Other information
SECTION 10: Stability and reactivity
10.1. Reactivity
No hazardous reactions known if used for its intended purpose
10.2. Chemical stability
Stable
10.3. Possibility of hazardous reactions
In case of fire, do not breathe fumes
May give off noxious and toxic fumes in a fire