Use and Care Manual

OPERATION YOUR UNIT
Operation butto n and display area di agram
Operation the ice-making process
1. Starting up
：
Plug in the power plug,the symbol will flash in the display win dow,press the
ON/OFF button on the control panel,the m achine will start to make ice when the external pipe add
water to reach the standard level on the water tank through the electromagnetic water valve,th en
the
symbol will change to light on always in display window and symbol rotate; The
ambient temperature will be displayed in the upper left of the display window，“80F”means the
ambient temperature is 80F,several minutes later,the flashing numbers will be displayed in the
ambient temperature display are a,the flashing number“10M”means still need 10minutes to finish
this ice making cycle.
2. Every ice making cycle finished,enter deicing process,the
symbol flash ，the external pipe can
add water to the water tank through the electromagnetic valve,and the arrow on the
symbol
will flash until the water reach the standard level,then the
symbol extinguish，the unit ente r
the nex t ice making cycle；When the water can not reach the standard level,the
symbol is
always bright,the unit stop working.After water shortage,the unit needs to be restarted,otherwise it
will start up auto matically after 15 minutes.
Note ： Each ice making cycle is around 11-20minutes,the ice making time will be changed
according to the ambient temperature and the water temperature change.Especially the first
ice making cycle,the ic e making cycle will be longe r because of the high water temperature
in the water tank,.But the cie making cycle w
ill not over 30minutes.
3. Adjust the ice thickness ;Press t
he “+”、“-”button on the c ontrol panel to adjust the ice thi ckness；
The number in the bottom lef t of the display win dow is the setting of the ice making time, default is
“0”,press“+”button one time the ice making time will add one minutes,the ice will be thicker；
Press“-”button one time the ice making time will reduce one minutes,the ice will be thinner.Restart
the machine it will go back to default“0”。
Note:The time c
urrently set only changes the next an d subsequent ice making cycle.
OPERATION
AREA
OPERATION
AREA
DISPLAY
AREA
+
ON/OFF
TIMER
-
CLEAN
11