Use and Care Manual

4. When the symbol lights up，the machine stop working,it will work again after you take out
the ice.
5.
Shut down the unit
：
During the unit making ice，press the“ON/OFF”button on the control
panel，the unit shut down and into standby mode.If you press "ON/OFF" longer than 5S during ice
making, then the unit enters the deicing process directly, this function can help remove the ice on
the ice plate. Press "ON/OFF" to shut down the machine.
6.
Timing setting
：
Setting range： 1-24 hours
Time shutdown：When the unit is running,it can set up the timing shutdown.
Time on：When the unit is on standby,you can set the unit with ON-TIME R.
How to set up the timing
Press the TIMER button, the default tim ing time is“1H”in display window，then press“+”button to
adjust the timing time you need,every time you press the“+”button,the time add 1 hour;Press“-”button
can red uce the timing time.During the process of time adjustment,The “H” in the lo
wer c orner of the
numb
er will flash，then after 5 seconds flashing without pressing, the “H” letter will change from flashing
to always displaying, mea ns the timer program has been completed.
In standby condition display 5H,it means the unit will start automatically after 5 hours;In ice making
condition display 5H,it means the machine will shut down au tomatically after 5 hours,
the "H" in the display screen indicates that the machine currently has timing function,
and th
e number in front w
ill be smaller and smaller. Until it becomes zero, the timing
ends, and the machine en ters the mode you need.
How to cancel timing
When the un it has a timing（the display window will display XX H),press“TIMER”button，the timing
is canceled after the number on the s creen and "H" are extinguished.
When the unit has a timing,the display area in the lower left corner will di splay the timing time and
the ice makin g setting time, and the display content will be switch
ed every 5S.
7. Automatic self-cleaning program,The default cleaning time is 20 minutes.
Start the self-cleaning program: After connecting all of the water pipe, plug on the main power
supply plug, then press “TIMER CLEAN”button on control panel for more than 5 seconds, to enter
the self-Cleaning program ,the symbol
rotate on display screens ， time count down are a
dispaly 20M. An d the “CLEAN ” light will always be on during this period, the digit window will
indicate the left time, the water pump runs for 8 minutes an d stops for 3 minutes, always recycle.
The total duration time is 20 minute s for one self-cleaning program. Also when the water pump
stops, the water will supply to the water tank automatically.
Cancel the self-cleaning program: It takes about 20 minute s to complete one self-c l
eaning
progra
m. When the program is over, the system will be in off-state automatically. And
also you can press the “ON/OFF” button on control panel to cancel the self-clean ing
program by force.
12