User Manual
Table Of Contents
- Table of Contents
- Introduction
- Preparations
- Quick Start
- Editing
- Editing a synth program
- The structure of a synth program
- 1. VOICE — SYNTH/VOCODER
- 2. PITCH — SYNTH/VOCODER
- 3. OSC1 (Oscillator 1) — SYNTH/VOCODER
- 4. OSC2 (Oscillator 2) — SYNTH
- 5. MIXER — SYNTH
- 6. FILTER — SYNTH
- 7. FILTER EG — SYNTH
- 8. AMP (Amplifier) — SYNTH
- 9. AMP EG — SYNTH/VOCODER
- 10. LFO 1, 11. LFO 2 — SYNTH/VOCODER
- 12. PATCH 1, 13. PATCH 2, 14. PATCH 3, 15. PATCH 4 — SYNTH
- Editing a vocoder program
- The structure of a vocoder program
- 1. VOICE — SYNTH/VOCODER
- 2. PITCH — SYNTH/VOCODER
- 3. OSC1 — SYNTH/VOCODER
- 4. AUDIO IN 1 — VOCODER
- 5. MIXER — VOCODER
- 6. FILTER — VOCODER
- 7. FC MOD — VOCODER
- 8. AMP — VOCODER
- 9. AMP EG — SYNTH/VOCODER
- 10. LFO 1, 11. LFO 2 — SYNTH/VOCODER
- 12. CH LEVEL A, 13. CH LEVEL B — VOCODER
- 14. CH PAN A, 15. CH PAN B — VOCODER
- Editing the effects and EQ
- Editing the arpeggiator
- Overall settings (GLOBAL)
- Using the microKORG with other MIDI devices (MIDI)
- Saving Data
- SHIFT functions
- Appendix
- Voice Name List
- Parameter List
- SHIFT Function List
- DEMO Song List
- MIDI Implementation Chart
42
18. EQ — SYNTH/VOCODER
This is a two-band equalizer. Use EQ FREQ (knobs 1 and 3 to specify the frequency that you want to adjust, and use knobs 2 and 4 to adjust
the gain of each frequency band.
Excessively raising the equalizer gain parameters may cause the output to be distorted.
LOW EQ FREQ. [40Hz...1.00kHz]
Sets the frequency of the low-range
equalizer.
LOW EQ GAIN [-12...12]
Sets the amount of boost or cut for
the low-range equalizer.
HI EQ FREQ.[1.00kHz...18.0kHz]
Sets the frequency of the high-range
equalizer.
HI EQ GAIN [-12...12]
Sets the amount of boost or cut for
equalizer.