Installation Sheet

Fig.3
Hardware Bag:
F1.Rod 12”*2 Rod# W30-1-077
F2.Rod 12”*4 Rod# W30-1-077
F3.Rod 6” *2 Rod# W30-H-077
Fig.4
Page: 2/2
IMPORTANT: Fixture should be installed by a qualified electrician to
ensure proper wiring and installation.
Dimmable with ELV and/or LED compatible wall dimmer switches.
.
Replacing LED module (Fig. 4)
The LED module can be replaced by a qualified
electrician without cutting of wire and without
damage to any decorative element to which the
fixture is attached. See installation steps for more
details (Fig.4.)
a. Shut off power.
b. Loosen screws (F) and take off the glass (I)
c. Use a pin to stick the hole on the quick connect
(Q) to disconnect the wire.
d. Remove screws (H) on the PCB to disconnect
the LED module.
e. Reverse steps a-d for installing the new LED
module.
f. Note: The LED module should be provided by a
specified supplier.