K R A ME R E LE CT R O N IC S L TD .
Contents 1 Introduction 1 2 2.1 2.2 2.3 3 3.1 3.2 Getting Started Achieving the Best Performance Safety Instructions Recycling Kramer Products Overview Defining the 613T, 613R 3G HD-SDI Mini Optical Transmitter/Receiver Powering the 613T, 613R 2 2 3 3 4 5 5 4 4.1 4.
1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis.
2 Getting Started We recommend that you: Unpack the equipment carefully and save the original box and packaging materials for possible future shipment Review the contents of this user manual i 2.1 Go to http://www.kramerelectronics.com to check for up-to-date user manuals, application programs, and to check if firmware upgrades are available (where appropriate).
2.2 Safety Instructions ! 2.3 Caution: There are no operator serviceable parts inside the unit Warning: Use only the Kramer Electronics input power wall adapter that is provided with the unit Warning: Disconnect the power and unplug the unit from the wall before installing Recycling Kramer Products The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected and recycled.
3 Overview The 613T converts 3G-SDI, HD-SDI and DVB-ASI (Digital Video Broadcasting – Asynchronous Serial Interface) digital video signals to optical signals. It transmits them over single mode fiber optic cable to the 613R that decodes the optical signals back to electrical 3G-SDI, HD-SDI and DVB-ASI digital video signals.
3.1 Defining the 613T, 613R 3G HD-SDI Mini Optical Transmitter/Receiver This section defines the 613T, 613R. Figure 1: 613T, 613R 3G HD-SDI Mini Optical Transmitter/Receiver 3.2 Powering the 613T, 613R Your 613T/613R pair comes with two 5V DC power adapters. Both units need to be connected to their external power adapter.
4 Using the 3G-SDI Mini Optical Set This section describes how to: Connect the detachable optical 3G-SDI Mini Optical Transmitter/ Receiver (see Section 4.1) 4.1 Avoid pitfalls when using the 613T and 613R (see Section 4.2) Connecting the 3G-SDI Mini Optical Transmitter/Receiver Set To connect the 613T 3G-SDI Mini Optical Transmitter with the 613R 3G-SDI Mini Optical Receiver, as the example in Figure 1 illustrates, do the following: 1.
4.
5 Technical Specifications INPUTS: 613T: SD/HD/3G HD-SDI on a 75Ω BNC connector 613R: 1 optical ST connector OUTPUTS: 613T: 1 optical ST connector 613R: SD/HD/3G HD-SDI on a 75Ω BNC connector MAXIMUM DATA RATE: Up to 3Gbps MAXIMUM LENGTH: 30km (19mi) @3G, 1080p 3G-SDI format FORMAT: SMPTE 424M: 3G HD-SDI; SMPTE 292M: HD-SDI; SMPTE 259: SDI, DVB-ASI RECOMMENDED FIBER-OPTIC CABLE: 1310, 1550nm single-mode optical fiber with ST connectors POWER CONSUMPTION: 5V DC, 1.
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.