Manual

PT-101DP - Connecting the PT-101DP 7

5 Connecting the PT-101DP

Always switch off the power to each device before connecting it to your

PT-101DP. After connecting your PT-101DP, connect its power and

then switch on the power to each device.

To connect the PT-101DP, as illustrated in the example in

Figure 2, do the

following:

1. Connect the DisplayPort source (for example, a computer graphics source)

to the INPUT connector.

2. Connect the OUTPUT connector to a DisplayPort acceptor (for example, a

DisplayPort display).

3. Connect the 5V DC power adapter to the power socket on the PT-101DP

and connect the adapter to the mains electricity.

Figure 2: Connecting the PT-101DP DisplayPort Repeater