Owner manual

Using the PT-102VN 1:2 Video DA
7
7
4x1VB
PT-1 02VN
Figure 3: Increasing the Inputs: Arranging a 4:2 DA
5.3 Increasing the Outputs
The PT-102VN can be cascaded with other high quality distribution amplifiers to
distribute a video source to more than two outputs. For example, you can increase
the number of outputs from two to ten, by connecting a PT-102VN 1:2 Video DA
unit to two Kramer 105VB 1:5 High Resolution Video DA units, forming a 1:10
DA, as the example in
Figure 4 illustrates:
To form a 1:10 DA, do the following:
1. Connect a source to the INPUT BNC connector of the PT-102VN.
2. Connect the OUT 1 BNC connector of the PT-102VN to the INPUT BNC
connector of the first 105VB.
3. Connect the OUT 2 BNC connector of the PT-102VN to the INPUT BNC
connector of the second 105VB.
4. Connect the five OUT BNC connectors of the first 105VB to the video
acceptors 1 to 5, and connect the five OUT BNC connectors of the second
105VB to five video acceptors as well.
5. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity (for the PT-102VN and both 105VB
units).
6. Adjust the output signal level and/or cable compensation equalization
level of the PT-102VN, if required.